国产在线一区二区三区,夜夜笙精品麻豆7777,久久久久久91香蕉国产,蜜桃91丨九色丨蝌蚪91桃色
Welcome to Changzhou yuen machinery equipment co. LTD!
Hot Keywords:     Automatic single end terminal    Ultra static terminal    Strip and strip punch
NewsNEW CENTER
CONTACT USCONTACT US

Conatct:Mr Wu

Mobile:+Q:2223857802

Tel:+Q:2223857802

E-mail:898063083@qq.com

Add:4-2026, yikang electromechanical plaza, tianning district, changzhou city

NewsYour current location: Home > News
Automatic single - head terminal fault solution
Release:2018-01-14Browse 1289 
Details

The length of the automatic single end machine is different

1. The pressure of the wire feeding wheel is not enough, and it needs to be adjusted

2. The wire delivery speed is too fast, and it is adjusted to the appropriate speed.

3. The wire itself is of different thickness.

4. The clearance of wire feeding wheel is too large, which needs to be reduced.

Wound wire core

1. The peeling knife is cut too deep and the knife needs to be adjusted.

2. Increase the return parameters.

3. Eccentric core of wire itself.

The thread won't peel off

1. Check the cutting depth of the line head, and adjust the knife value if the cutting mark is too shallow or too deep.

2. The wire feeding wheel pressure is not enough, so the wire feeding wheel pressure needs to be increased.

3. The return parameter may be set too large.

4. The blade is worn and needs to be replaced.

Thread tail won't open

1. The chuck clamping force is small to adjust the inlet and outlet air valve.

The thread is too thin to slip.

3. The return parameter may be set too large.

4. The blade is worn and needs to be replaced

One end of the line injury

Unbroken end

The two ends of the blade are not well adjusted and should be the same size.

The ends are sometimes thrown forward or backward

Adjust the height of the pressure end device if the pressure end device is too large or too small.


Link: 常州360推廣
  Copyright  Changzhou yuen machinery equipment co. LTD  All Rights Reserved  【Login】
TopQQMegWechatBottom
QQ
點擊這里給我發(fā)消息
QQ
點擊這里給我發(fā)消息
Welcome to leave a messageClose
Contact:
Tel:
  
WeChat, scan, plus attentionClose
国产在线一区二区三区,夜夜笙精品麻豆7777,久久久久久91香蕉国产,蜜桃91丨九色丨蝌蚪91桃色